可訂購部件
| 型號 | 可訂購的器件編號 | 訂購代碼(12NC) | 封裝 | 從經銷商處購買 |
|---|---|---|---|---|
| NEX94212BDG-Q100 | NEX94212BDG-Q100Z | 935692531346 | SOT223 | 訂單產品 |
Register once, drag and drop ECAD models into your CAD tool and speed up your design.
Click here for more informationNEX94212BDG-Q100
120 mA, 40 V low-dropout voltage regulator
The NEX94212-Q100 device is a Low-Dropout (LDO) linear regulator with fixed output voltage of 5 V which can supply loads up to 120 mA. The device supports a wide input voltage range from 4 V to 40 V (up to 45 V transient) to withstand cold-cranking and load-dump transient conditions.
The device integrates multiple protection features. When configured as a power supply for off-board components (e.g., sensors) with external cables, the built-in short-to-battery and reverse polarity protections (-42 V) safeguard the system against harness failures. The device employs a back-to-back PMOS topology to block reverse current without requiring an external diode. The device also supports current limit protection to protect against output short-to-ground or overload conditions that will eventually trigger thermal shutdown if shorting or overloading lasts long.
The device switches to standby mode by pulling down the EN pin, which enables an ultra-low shutdown current of 0.65 μA typical to extend battery life. It operates across an ambient temperature range from -40 °C to 125 °C, and a junction temperature range from -40 °C to 150 °C. Additionally, this device is available in SOT223 package.
| Part number | Package | Body size (nom) |
|---|---|---|
NEX94212BDG-Q100 | SOT223 | 6.5 mm x 3.5 mm |
Features and benefits
- Automotive product qualification in accordance with AEC-Q100 (Grade 1)
- Ambient temperature (Tamb): -40 °C to 125 °C
- Junction temperature (Tj): -40 °C to 150 °C
- Input voltage range: 4 V to 40 V
- Absolute maximum input range: -42 V to 45 V
- Output voltage range: 5 V (fixed)
- Absolute maximum output range: -1 V to 45 V
- Output voltage accuracy: ±1.5% (max)
- Maximum output current: 120 mA
- Low dropout voltage:
- 210 mV typical at 100 mA (VOUT = 5 V)
- Low quiescent current (IQ):
- 40 μA typical quiescent current at light loads
- 0.65 μA typical shutdown current
Active output discharge with a typical discharge current of 800 μA
- Stable with a wide range of ceramic output-stability cap:
- ESR from 0.001 Ω to 5 Ω; output capacitor from 4.7 μF to 470 μF
- Integrated fault protection features:
- Reverse polarity on input
- Short to battery protection on output
- Reverse current protection
- Short-circuit and overcurrent protection
- Thermal shutdown
- Package: 4-pin SOT223
RθJA = 106.4 °C/W
Applications
Power supply for off-board sensors
Powertrain of electric vehicles (EV) and hybrid electric vehicles (HEV)
Body control modules (BCMs)
Automotive head units & clusters
封裝
| 型號 | 可訂購的器件編號，（訂購碼(12NC)） | 狀態 | 標示 | 封裝 | 外形圖 | 回流焊/波峰焊 | 包裝 |
|---|---|---|---|---|---|---|---|
| NEX94212BDG‑Q100 | NEX94212BDG‑Q100Z (935692531346) |
Samples available / Development | N9212B |
SC‑73 (SOT223) |
SOT223 |
WAVE_BG-BD-1
|
暫無信息 |
環境信息
| 型號 | 可訂購的器件編號 | 化學成分 | RoHS | RHF指示符 |
|---|---|---|---|---|
| NEX94212BDG‑Q100 | NEX94212BDG‑Q100Z | NEX94212BDG-Q100 |
|
|
文檔 (7)
| 文件名稱 | 標題 | 類型 | 日期 |
|---|---|---|---|
| NEX94212_Q100 | 120 mA, 40 V low-dropout voltage regulator | Data sheet | 2025-10-15 |
| AN90063 | Questions about package outline drawings | Application note | 2025-10-22 |
| SOT223 | 3D model for products with SOT223 package | Design support | 2019-01-22 |
| Nexperia_package_poster | Nexperia package poster | Leaflet | 2020-05-15 |
| SC-73_SOT223_mk | plastic, surface-mounted package with increased heatsink; 4 leads; 4.6 mm pitch; 6.5 mm x 3.5 mm x 1.65 mm body | Marcom graphics | 2017-01-28 |
| SOT223 | plastic, surface-mounted package with increased heatsink; 4 leads; 2.3 mm pitch; 6.5 mm x 3.5 mm x 1.65 mm body | Package information | 2022-05-30 |
| WAVE_BG-BD-1 | Wave soldering profile | Wave soldering | 2021-09-08 |
Longevity
The Nexperia Longevity Program is aimed to provide our customers information from time to time about the expected time that our products can be ordered. The NLP is reviewed and updated regularly by our Executive Management Team. View our longevity program here.
模型
| 文件名稱 | 標題 | 類型 | 日期 |
|---|---|---|---|
| SOT223 | 3D model for products with SOT223 package | Design support | 2019-01-22 |
訂購、定價與供貨
| 型號 | Orderable part number | Ordering code (12NC) | 狀態 | 包裝 | Packing Quantity | 在線購買 |
|---|
樣品
作為 Nexperia 的客戶，您可以通過我們的銷售機構訂購樣品。
如果您沒有 Nexperia 的直接賬戶，我們的全球和地區分銷商網絡可為您提供 Nexperia 樣品支持。查看官方經銷商列表。
How does it work?
The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.